Programming 3.3V PIC with PICKit2 clone (5V) (Ramon)
Hi,Is it possible to program a 3.3V device (18f27j53, SPDIP) using PICKit2 clone which gives 5V at its Vdd pin using the active clamp modification given below? All programming related pins except Vdd...
View ArticleHelp getting started with PM3 (cluelessnewbie)
I'm using MPLAB MP3 ------------- PM3 ICSP RJ11 Adapter (RJ11 cable) ------------- dsPICDEM 1.1 Plus boardBut everytime I try to 'verify device' etc it replied 'Invalid target deviceid', Expected 02c3,...
View ArticlePICkit3 Keep target powered (mantor)
When using command line programming, I'm unable to find out how to keep the target powered via PICkit3 after programming has finished.With PICkit2 command is -T as that is in the users guide. With...
View ArticleProgramming using a PICKit 3 - new device support (SGHughes42)
I'm wondering, is there something I've missed, or have Microchip totally dropped the ball with something simple and basic - the ability to use the PICKit 3 to actually program hardware? I use the...
View ArticlePICkit 3 can't program 18F65J11 (Waax)
Hello I've got a board with a PIC16F690 and a PIC18F65J11 on it. Both of them are powered by a 3.3V rail. To program those PICs I use the IPE V2.05 and PICkit 3 Firmware 1.30.09.I can program the...
View ArticlePM3 with Linux (swmcl)
Hi, I am considering the PM3 on Linux. Ubuntu 12.04 LTS. How far is that away from a completely reliable solution in mid-2014? Is it a truly Plug-and-Play works-everytime solution or are there a number...
View ArticleMPLAB PM3 and Linux (swmcl)
Hi, How 'production ready' is the PM3 on Linux? Is it a completely foolproof solution or are there a number of outstanding issues? There is a major cost involved so I would appreciate an honest...
View ArticleMPLAB 8.92 PM3 SQTP problem on SD card (19Justin73)
I am trying to write a serial number to a PIC16f689 using a PM3 in MPLAB 8.92, i have generated the SQTP file to write a 2 byte sequential serial number using RETLW to program memory, within MPLAB it...
View ArticlePROBLEM : Programming PIC12F1822 (Robin1)
Dear All, We have a project with this reference of PIC below : PIC12F1822 ( DFN package with only 8 pins I/O) The problem is we have to use 2 pins GP0 and GP1 in a normal function ( so we have to...
View ArticleINSTALLATION ISSUES (chirag31)
I bought MPLAB STARTER KIT FOR PIC 24 MCU with product number DM240011. The problem is that I am not able to install it on my PC. The problem being a missing file with (.msi) extension. If you could...
View ArticlePICKIT 3 using as pickit 3-to-go, wrong boot flash jump? (ulmus)
Hi! I was always using pickit 3 together with MPLAB IDE 8.xx. All was ok till now, when i decided to use 'to-go' feature.I thought that everything is ok, all went right, all was programmed, but... none...
View ArticlePM3CMD save environment w/o PM3 connected (ErnieM)
Using MPLAB I can save environment to my hard drive without a PM3 connected (as it is about a 7 hour drive from me now). Is it possible to save an environment using PM3CMD (or another tool) without the...
View ArticlePM3 Card Enviroment has wrong LVP setting (JWini)
Hello All, We've been using our PM3 in standalone mode with a card for a while now, but recently it wouldn't program one of the processors we use (PIC16F1823). Poking around I found that the Programmer...
View ArticleTarget Device ID (0x0) does not match expected Device ID (0xe00). (Benjamin...
hello, I have a "MPLAB ICD 3 Evaluation Kit of microchip" card, I put a PIC16F876A and send a simple program that would light a LED everything worked fine, after that I wanted to transfer to another...
View ArticleCheck the good programming PIC using PICKIT (ICDDEBUG.txt) (fishingman)
Hi,I used before the ICD2 programmer to automatically program PICs (using a developed software). I used ICDDEBUG.txt file to check if the PIC is programmed or there is an error. I wanted to know if...
View ArticleChecksum differences between PICKit 2 and PICKit 3 (Ulminpoika)
Hello forum, I'm having problems with the checksum of a .hex file. There are different checksum results depending on if I use PICKit 2 Programmer 2.50.02 or the Integrated Programming Environment 1.90...
View ArticlePicKit 3 Windows 8.1 x64 USB Packet Decode? (JANickerson)
I have submitted this to support.They responded "the Beagle USB monitor file was not very helpful in identifying the PICkit 3 problem"In hopes there is someone who understands/knows USB better than I,...
View ArticlePickit 3 doesn't detect PIC16F1454 if Vdd under 5V (elliotwhite)
hiya, i'm using a pickit3 to program a 16F1454, there is nothing connected to the PIC except the ICSP connector , DC power connector and a decoupling capacitor.With the target Vdd at 3.3V the Pickit...
View Articlepickit3 bricked (zobs)
Hello all, I have been having an issue with the pickit 3. I have been working with two pickit 3's after believe that one of them may be defective, neither of them where defective and it turned out that...
View ArticlePicKit 3 and RS/AP upgrade (rjachnie)
Hi, I just received my brand new PicKit 3 and i already got an issue with it. I connected it and Win7 x64 installed the drivers just fine. Mplab used to detect it correctly too. When i clicked on...
View Article