Target Device ID (0x5460) does not match expected Device ID (0x5440). (MicroCNC)
What does this mean?. I can measure the voltage at VDD. What is telling me? Thanks; Chris The following memory area(s) will be programmed:program memory: start address = 0x0, end address =...
View ArticleDoes MCLAR pin one requires pull up resistors 10K (MicroCNC)
I am getting this message again; Target Device ID (0x5460) does not match expected Device ID (0x5440). Regards; Chris
View ArticlePICKIT3/ICD3 programming error with 12F1840 (coltaan)
So, I have an interesting problem with 12f1840 : the device (12f1840) powered correctly no additional parts, only one pull-up resistor on MCLR/VPP error message: "Target Dev
View ArticlePICKIT3/ICD3 programming error with 12F1840 (coltaan)
So, I have an interesting problem with 12f1840 : the device (12f1840) powered correctly no additional parts, only one pull-up resistor on MCLR/VPP error message: "Target Dev
View ArticleProblem Solved: PICkit 3 working on Windows 7, 64 Bit ~ MPLAB X IDE v1.95...
Windows 7, 64 Bit ~ MPLAB X IDE v1.95 ~ PICkit 3 Error: Communication failure when attempting to program a device. Solution: A combination of many things suggested on the web was used. Installed the...
View Article:BUY REAL FAKE ****S,DRIVERS LICENSE AND OTHER DOCS(forasia447@gmail)...
BUY A TRUE FALSE PASSPORT ( forasia447@gmail.com ) DRIVING LICENCE / CARD ( ID) , VISA false , fake birth. forasia447@gmail.com We are a team of professionals with years of experience in the...
View ArticleProgram a 16F628 with pickit1 ? (micropopper)
Hi all, First visit to the forum. I have a pickit1 that i have learnt on in the past. I have a project where i am using a 16F628. Is it at all possible to use the kit1 or is it time to upgrade, if so...
View ArticlePICkit 2 for Tests during Product Developing -> communication over own...
Hej, I was looking for a description how I can control my PICkit2 over CMD. I found nothing. If someone knows something about a cmd commad-list or a driver with whom I can communicate ... *great*. My...
View Articleinterfacing ADC to dsPIC33f (sangeeta)
hello. I have written a code for ADC for dsPIC33fj128mc202 IC.The output of ADC is constant 1007 for both 0V as well as 3.3V.please suggest me some ideas if I am wrong anywhere in the code. 
View ArticleMPLAB IDE 2.0, PicKit2 and PIC16F690 - can't find pickit in IDE (matthew1971)
Hello, I've just updated to MPLAB X 2.0 and now when trying to program a 16F690, I get ... "Connecting to programmer...The programmer could not be started: Could not connect to tool hardware:...
View ArticleHow do I power back my PIC after was program. (MicroCNC)
Okay, I programmed the chip and was compiled successfully. I could press all my buttons and scroll up/down on my menu play like I want to see all my hardware is working correct. How do you suppose to...
View ArticleI program 3.0V but it shows 1.4V at my buttons (MicroCNC)
Does anyone knows why?.Pressing the buttons will make the 0V and not pressing 1.4V is register. I don't know why. I am using PIC18; void button_init(void) { /* Set button pins to input */ TRISBbits.RB1...
View Articlepk3cmd without mplap (elreha)
Hi all, we want to setup pk3cmd on a production line pc (windows xp sp2) without installing mplap. We have tried this but the programmer (Pickit 3) hasn't been found. Any help would be appreciated.
View ArticlePICKit3 Windows 8 - Solved (aaronjward)
I was having issues with a PICkit 3 and windows 8. I wanted to post about it so others will find it. The problem: Windows drivers would find the device as "HID Compliant Vendor Device" at...
View ArticleList of/table of PIC ICSP pin-outs across all 8bit/16bit PIC...
I want to make a universal adapter/multi-device 8-bit/16-bit PIC programmer board for my PICkit 2/3 and would like to avoid going through all of the datasheets for the various 8-bit and 16-bit PICs....
View ArticlePICKIT 3 misbehaving possibly damaging PICs (elliotwhite)
I have been using a PICKIT3 to program 16F1823 for a while with no problems, as a matter of practice I check that the programmer will correctly detect the device on the target board before populating...
View ArticleRevert to pre-MPLABX V2.00 PICKIT3 firmware? (Tim hutcheson)
Is there a way to revert to the version PICKIT3 firmware installed with MPLABX V1.95? The latest firmware may have rendered my two PICKIT3 device useless. My code was running fine and having finally...
View ArticlePICKit 2 pages on microchip.com totally borked! (Ian.M)
The PICkit 2 programmer page: http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en023805 and
View ArticlePickit 3 Uart Tool ? (Unique)
So I downloaded the PICkit 3 Programmer App and Scripting Tool v3.1[link=http://ww1.microchip.com/downloads/en/DeviceDoc/PICkit3%20Programm
View ArticleHow many times can a PIC be programmed? (RWhite)
Hi- The subject says it all. I need to know how many times a PIC can be programmed before attempts to program it another time will fail. I'm using a 16F883 and a PICkit3. I've had to toss a few chips...
View Article