PICkit3 not detecting target device (tushara)
I have been working on "Pickit3" for a while now. I didnt have any problem except that my pickit3 sometimes used to show "Target Device ID (0x0) does not match expected Device ID (0x2a60)." and...
View ArticleHelp figuring out whether old equipment is still usable (RandyC)
Though I once did a lot of work with microchip parts, its has been a long time. Unfortunately I'm now on my own, and can no longer just request a PO to buy new equipment, so I'm hoping my old gear is...
View ArticleDebugging with PICkit 3 and C18 works correctly but there is a problem with...
Hi. I have a hardware based on the RN4020 PICtail (PIC18LF25K50). The firmware example for this hardware is made C18. It works very well and I can debugging the project with the PICkit 3. I started...
View ArticlePICKIT3 random "connection failed" (piccandies)
Using a real PICKIT3 (code: 1.39.15) in MPLABX 3.2 in Windows 10 on 18F part...It programs fine, but after a few minutes (or randomly), pressing the program icon fails to re-establish connection to the...
View ArticlePICkit 3 Programmer Application User's Guide, where is it? (chuckr12)
I am new to the forum and have come here because the Document for PicKit 3 says there are 3 ways to program with it. The 3rd being through PICKit 3 Programmer application and the document references...
View ArticleAccess Denied : While trying to Post a new Thread ?? (skg.sudheer)
Access DeniedYou don't have permission to access "http://www.microchip.com/forums/post.aspx?" on this server.Reference #18.24460317.1469105892.52d6d192 I am receiving this error while posting a new...
View ArticlePIC18F46K22.h header file? (fabienlyrique)
does anyone know where I can download a header file for PIC18F46K22?..
View ArticlePICkit3 and Command Line Interface "Boot, Secure and General Segments"...
Hi, I am trying to use the ipecmd.jar to program the dsPIC30F5011 very similar to this . I am getting this error: “You are trying to change protected boot memory. In order to do this you must select...
View ArticlePicKit 3 and dsPIC33EP128GM304 connection? (Envergure)
Hello, I am wondering how to connect the PicKit 3 to program a dsPIC33EP128GM304 device. The pin names ICSPCLK, ICSPDAT, PGC and PGD mentioned in the PicKit 3 guide do not occur in the datasheet....
View ArticlePickit3. Target Vdd function dead. (Andrius_Vaiceliunas)
Hi. I try project boost converter with mcu PIC16LF1508. I progamming PIC in working pcb, existing firmware was duty cycle = 50, new firmware duty cycle = 75. When new firmware writing, boost converter...
View ArticleAC162049 Universal Programming Module for MPLAB ICD 2 and ICD 3 (SweetOrange)
Hi! I want to know what is the pin range of devices that the universal programming module AC162049 supports. thanks..
View ArticlePickit 3, power to chip (pdrap)
I have a Pickit 3 with a ZIF socket board that plugs into the programmer. When I program a chip using my Pickit 3, my procedure has been to 1) unplug the USB cable to the programmer, 2) insert the PIC...
View ArticleI haven't succed to install Pickit2 on Windows8 tablet (Motz)
I tried several days to instal it, but I didn't succed. I found the version 2.61, although I wished an older version.There was the same error every time: need .NET Framework a certain version.I...
View ArticlePICKit3 - Pile of rubbish? (crosland)
Brand new PICKit3, Windows 8.1 MPLAB IDE 8.90.Target board works fine with a PICKit2 so no problems there. Using the same short cable between the PICKit and the target.First thing it wants to do is...
View ArticlePICkit2/PICkit3 not found on my Surface Pro (JRad)
For the past 6 months I've been unable to use my PICkit2/PICkit3 with my Surface Pro 4 (running Windows 10). It was unable to find the attached programmer even though it was connected and visible in...
View ArticlePICKIT 3, not able to debug. (abhishek@matternet.us)
Hi, I am using a pic16f1619 microcontroller and a pickit3 programmer/debugger. I am getting the following error when I try to debug. The build is complete and I am also able to upload the code onto the...
View ArticleProblem with two PICKit3's connected (kevinmiller)
I have two PICKit3's connected at the same time. One associated with one project, the other with a 2nd project. At some point this worked fine and I was able to set the working project and use the...
View ArticleProgramming DM240001 with pikKIT3? (fsonnichsen)
I ordered a DM240001 explorer 16 board which I will debug/program with my ICD3. However is there an adapter that I can use to program/debug it with a PICkit 3? thanksfritz..
View Articlepickit2 finding and losing device (Kiyoshi7)
hi, I have a pickit2 clone which I've made and already use with pic18f2550 but when I try to use it with a pic16f887 it doesn't work. when I start the PICKIT2 programmer it finds my device, but in the...
View Articleconnection problems pickit 3 (zakmetmoes)
Hello,First of all, thank you for opening this thread as it must look like yet another newbie with a pickit 3.I am not entirely new to programming with microchip, but it has been a long while. I have a...
View Article