So, the Pickit3 is stuck downloading the RS . . . What gives, I have been with this programmer 2-3 years not the most reliable but adequate. I am trying to program a new bootloader to a mature project and it wont get past Downloading RS . . . ?..
↧
PICKIT3 Stuck downloading RS (cyd)
↧
Issue with recognizing PIC32MX250F128B with Pickit3 (pic4life)
I've been trying to use the Pickit3 to connect to the PIC32MX250F128B in the skinny DIP package with no luck. I've attached the connections I'm using (added a 0.1uF capacitor to ground on the MCLR/ line as well but with no change. The 10Ohm resistor on AV..
↧
↧
Programming multiple hex files to a device with PICKit2 and pk2cmd (nyholku)
I want to erase the device (PIC18F45K50) and program two separate .hex files into the devie, a bootloader and the actual firmware. Can I do this with pk2cmd and how? I tried this script: echo Erase device
pk2cmd -pPIC18f45k50 /e /j /r
echo Program bootl..
↧
Combining bootloader and firmware hex files into one file and flashing that with PICKit2 (nyholku)
I've got a bootloader and firmware that both work separately. By that I mean that I program the bootloader with PICKit2 and the download the firmware via the bootloader (USB) to device and the bootloader programs the firmare to the chip. This all works ni..
↧
Why is PICkit3 not recommended as a Production Programmer (David_G)
From various documents... "Note: The PICkit 3 In-Circuit Debugger/Programmer is NOT a production programmer. It should be used for development purposes only." Why is that?..
↧
↧
PICkit3 problem: it always fails on first attempt to program (David_G)
Hi, Im new to using the PICkit3. I have a strange problem. I am running it with MPLAB X IDE v3.51 to program a PIC16F883 on a PCB. (PICkit3 firmware 01.46.14). I have followed all the guidelines (as far as I am aware) and the PicKit3 is connected directly..
↧
Still no functional stand-alone programmer for Pickit3? (P Lameijn)
Is there still no decent stand-alone program for the Pickit3?I need to use it (rather use Pickit2, but it can't program the 24FJ1024GA610 regrettably) The scripting version 3.01 works fine, but doesn't support newer MCU's.....
↧
Problem using Pickit 3 in debug with older part #s (jlawton11)
I've been working well as of late with some PIC16F parts in 20 and 28 pin DIP packages. As soon as I decided to try a project with a 40 pin DIP I started having trouble, I guess because I picked a PIC16F884 which I guess now is considered kind of an old p..
↧
PIC Interface With ISL12022M RTC issue (ajitnayak87)
Dear all, I am newbie to Pic Programming, I am using MPLAb & Hitech compiler to execute above code. I am trying to Interface PIC16F886 with ISL12022M Real time I2C device. i copied code example written for DS1307 interface with 16F887A PIC. I have cap..
↧
↧
Have 5 PIC10F200's all 5 read "Invalid calibration data (0x00) (shocktron100)
OK..........I have tried as much on my own as I possibly can. I've exhausted all of my resources. I cannot get past this error message when first connecting to the PIC with a PICKIT3 using MPLABX IDE and MPLAB IPE. What in the world could I possibly be do..
↧
Programming 18LF1320 at 3.6 volts - Row Erase? (tunelabguy)
I need to program my 18LF1320 in a circuit that includes components (a RN4871) that cannot tolerate more than 3.6 volts. Unfortunately the 18LF1320 does not bulk erase reliably below 4.5 volts, according to the programming specs. I am at the early develop..
↧
PICkit 3 Download (PICMAN1)
Hi AllHave a nice dayPlease advice to download PICkit3 software from the microchip website I mean free download link Thanks in advance..
↧
Creating a PK2Devicefile.dat (jalcock501)
Does anyone know where the documentation/byte breakdown for the PK2Devicefile.dat can be found? All of the links I had to microchips docs have stopped working, so I suspect they have taken them down. Any documentation or help would be greatly appreciated...
↧
↧
how to add PIC18F86K90 to PK2Devicefile.dat (jalcock501)
Hi, what is the best way to add a new pic to a pickit 2 device file? ThanksJim..
↧
Debug skips line / bad port: Is PICKit 3 bad or is my uC chip fried (PIC24F32KA304)? (SirCut)
(Hi. Sorry if answers to my question exist somewhere. I could not find or filter out my specific situation or problem) I am confused! I want to toggle output port pin RB12 (which is configured as TRISB output). Stepping through debugger (optimization 0)PI..
↧
PICkit 2 - Busy light keeps blinking (wonne)
I was debugging a project i'm working on that involves bootloaders. All worked fine until suddenly while debugging the PICkit busy LED started blinking. And it won't respond anymore in MPLAB X IDE. My guess:In my guest program project I included a bootloa..
↧
Unreliable programming with PicKit2 / 18LF2685 (kelt)
Hi everybody, I have a strange situation with some of my boards.I program the installed 18LF2685 with my PicKit 2 and everything looks OK.The program runs perfectly. No issue at that time. But some days, weeks or months later, the program does not work an..
↧
↧
Add pic16F18855 in PicKit2DeviceFile (an80)
Hi everybody,
I have to add pic16F18855 to PK2DeviceFile.dat for pickit2. This is one of the Script, but not works. Please help. Name MR_Rd_ID (MR_CfgWrScript) - load configuration
Script 310 Device PIC16F18855 ScriptIndex Commands and operands Coments ..
↧
Pickit3 no write in dspic30f4011 (renatox_)
Hi good day, i use the dspic33ep256mu806 and other dspic33 with pickit3 and this write without problems, but when intend write the dspic30f4011, obtain this fail: //take a lot of time
Now Downloading new Firmware for target device: dsPIC30F4011
Now Downloading new Firmware for target device: dsPIC30F4011
↧
PICKIT 3 CONNECTION FAILED ERROR MESSAGE (sri5496)
I WAS CHECKING IF THE PICKIT 3 IS COMMUNICATING OR NOT,I JUST TRIED A SIMPLE PROGRAM AND HAD RUN IT IN THE MPLAB X VERSION.I GOT THE ERROR MESSAGE AS CONNECTION FAILED. WHILE DEBUGGING IT SAYS PICKIT3 SELF TEST NOT SUPPORTED.....
↧